Caterpillar SKID STEER LOADER 297D XHP - catalog of spare parts
Dimensions
Ground clearance - 0.8 feet in
Bucket Pin Height - Maximum Lifting Height - 10.5 Feet
Height - Cab Top - 7 ft.
Total Length - Track - 90 Inches
Reach at maximum lift / drop - 30.6 inches
Vehicle Width - 76.2 inches
Length - Track on the ground - 71.1 inches
Length - Without Bucket - 124.2 Inches
Length - with bucket on the ground - 152.2 inches
Maximum total height - 158.4 inches
Bucket Finger Height - Carry Position - 7.5 Inches
Ground clearance at maximum lift and unload - 94.3 inches
Departure angle - 31 degrees
Maximum angle of dumping - 52 degrees
A-pillar angle - maximum height - 83 degrees
Turning radius from center - rear - 73.2 inches
Turning radius from center - hitch - 57.9 inches
Turning radius from center - bucket - 91.7 inches
Maximum reach - with weapons in parallel - 50.1 inches
Pin Bucket Lug - Maximum Lift Height - 15.6 Inches
Choose SKID STEER LOADER 297D XHP section:
Specifications
engine
Net power - 106hp
Displacement - 232cu per
Hole - 3.9 inches
4.7 inch travel
Net Power - ISO 9249 - 107 HP
Gross Power - SAE J1995 - 110hp
Engine Model - Cat C3.8 DIT (Turbo)
Net Power - SAE 1349 - 106 HP
Power train
5.9 mph forward
Speed Backtrack - 5.9 mph
Speed reverse - 2-speed - 9.4 mph
Forward Speed - 2-Speed - 9.4 mph
Hydraulic system
Hydraulic Flow (1) - XHP
Hydraulic power - 94 hp
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 23 gallons / min
Hydraulic flow (2) - standard
Hydraulic Power - Estimated - 44 HP
Maximum hydraulic flow of the loader * - 40 gal / min
Performance characteristics
Rated Operating Power - 50% Tipping Load - 5,000 lbs.
Nominal Operating Power - 35% Tipping Load - 3,500 lbs
Ground Contact Area - 2233in2
Ground Pressure - 4.8 psi
Tipping Load - 10,000 lbs.
Breakout Force - Tilt Cylinder - 7491lb
Service replenishment options
Cooling system - 4.1 gal
Fuel Tank - 32.2 gallons
Hydraulic Tank - 10.3 Gallons
Crankcase - 3.5gal
Hydraulic system - 14.5 gal
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II